certified network cable installer

For the certification of ethernet cabling to be reliable, it is necessary to use tools adapted to the different installations. Outside of Fluke certification, Softing IT Networks also offers certifiers adapted to different cabling systems. Depending on their level of expertise, these tools certify the ethernet cabling by performing reliable and rapid test reports, self-tests and measurements. These certifiers thus make it possible to know if the cabling is in conformity with IEEE 802.3ab.

In order to proceed with the certification of ethernet cables, several solutions exist. Among them,Fluke networks and its Versiv range presents a complete offer. This solution aims to simplify the life of IT teams by remedying the tester configuration issues, by performing analysis and problem solving or by providing intelligible analysis reports. The certification of ethernet cables is possible thanks to various tools. They are chosen according to the type of installation, whether it is copper or fiber optic cabling.

certified network cable installer

certified network cable installer course

Checking instruments perform basic continuity operations, making sure that all wires in a wiring link are connected to the appropriate break points and not to another conductor. It is essential to maintain the correct pairing of wires in twisted pair cabling. The best verification testing tools also verify wire pairing and detect installation faults such as 'split pairs'. Verification test tools can also aid in troubleshooting by generating a dial tone to locate a wiring link. Verification test instruments sometimes include additional functionality, such as a Time Domain Reflectometer (TDR) to determine the length of the hardwire link or locate an open or short circuit on the link under test. These test instruments do not provide any information on bandwidth or suitability for high speed data transmission.

Qualifying test devices are part of a new class of testing devices that meet the needs of network technicians who are not installing new cabling but who need to troubleshoot networks. Qualifying testers perform the tests that decide whether an existing cabling link supports "Fast Ethernet" (100BASE-TX), Voice over Internet Protocol (VoIP), or Gigabit Ethernet requirements. These test tools additionally allow the network technician to quickly isolate or resolve network protocol cabling issues. Qualification testing instruments, such as CableIQ ™ Qualification Tester, include all the capabilities of verification test instruments, but are more powerful in that they perform a cable bandwidth assessment and identify errors that affect bandwidth. Qualifying testers do not perform the full range of tests prescribed by standards to be considered "certification tools.

certified network cable installer course 

cable installer certifications

Part of the Versiv Cabling Certification product line, DSX CableAnalyzer provides accurate and error-free certifications. In the installation industry, you have to contend with multiple teams, multiple media types, and multiple testing requirements. The difference in profitability is played out at a few percentage points. The DSX tool certifies copper cabling and meets all standards, including level VI / 2G accuracy, which simplifies project management and gets you to system acceptance faster. It's not just for experienced technicians and project managers. With varying skill levels, anyone can improve test setup, operation, and reporting, while managing various projects simultaneously.

cable installer certifications

network cable installer

 For the certification of ethernet cabling to be reliable, it is necessary to use tools adapted to the different installations. Outside of Fluke certification, Softing IT Networks also offers certifiers adapted to different cabling systems. Depending on their level of expertise, these tools certify the ethernet cabling by performing reliable and rapid test reports, self-tests and measurements. These certifiers thus make it possible to know if the cabling is in conformity with IEEE 802.3ab.

The DSX CableAnalyzer copper link test solution enables the testing and certification of twisted pair cabling for Ethernet deployments up to 40 Gb / s. It deals with any cabling system, both Cat. 5th, 6, 6A, 8 or Class F Aand I / II. Cable certification is part of a process that begins with system design and ends with system acceptance. The faster it is, the more profitable it is. Unfortunately, there are many difficulties that slow down the process, such as incorrect tester setup, using wrong limits, having to wait for qualified technicians to analyze or troubleshoot problems, misinterpreting results, and creating reports. test impossible for customers to understand.

network cable installer

network cable certifications

 To stay in compliance with the new standards, certification of ethernet cables is essential. Ethernet certification guarantees network performance. To do this, the IT teams use certifiers to provide reliable information on the network and the compliance of cabling installations. In order to offer an analysis of network performance consistent with current infrastructures, ethernet certification is carried out through universal tools. These are suitable for both copper cabling and optical transport networks.

In order to proceed with the certification of ethernet cables, several solutions exist. Among them,Fluke networks and its Versiv range presents a complete offer. This solution aims to simplify the life of IT teams by remedying the tester configuration issues, by performing analysis and problem solving or by providing intelligible analysis reports. The certification of ethernet cables is possible thanks to various tools. They are chosen according to the type of installation, whether it is copper or fiber optic cabling.

network cable certifications

certified network cable installer training

 Checking instruments perform basic continuity operations, making sure that all wires in a wiring link are connected to the appropriate break points and not to another conductor. It is essential to maintain the correct pairing of wires in twisted pair cabling. The best verification testing tools also verify wire pairing and detect installation faults such as 'split pairs'. Verification test tools can also aid in troubleshooting by generating a dial tone to locate a wiring link. Verification test instruments sometimes include additional functionality, such as a Time Domain Reflectometer (TDR) to determine the length of the hardwire link or locate an open or short circuit on the link under test. These test instruments do not provide any information on bandwidth or suitability for high speed data transmission.

certified network cable installer training

network cable installer certification

Qualifying test devices are part of a new class of testing devices that meet the needs of network technicians who are not installing new cabling but who need to troubleshoot networks. Qualifying testers perform the tests that decide whether an existing cabling link supports "Fast Ethernet" (100BASE-TX), Voice over Internet Protocol (VoIP), or Gigabit Ethernet requirements. These test tools additionally allow the network technician to quickly isolate or resolve network protocol cabling issues. Qualification testing instruments, such as CableIQ ™ Qualification Tester, include all the capabilities of verification test instruments, but are more powerful in that they perform a cable bandwidth assessment and identify errors that affect bandwidth. Qualifying testers do not perform the full range of tests prescribed by standards to be considered "certification tools." "

network cable installer certification

cnci

 Certification testing tools determine whether a link is Category (TIA) or Class (ISO) compliant; for example, category 6 or class E. These standards are independent of specific network technologies. They are more “future proof” as new network technologies may emerge with designs based on these standards and would therefore be supported by certified installed cabling. Certification is the mandatory final step for many structured cabling manufacturers to provide warranties for new cabling installations . The DSX CableAnalyzer ™ series has become the leading certification test device in the market for professional data transmission installers as well as LAN network infrastructure workers.

Cable qualification testers - determine if an existing cable link can support certain network speeds and technologies

cnci

cnci certification

Testing network cables provides assurance that the installed cable links provide the desired transmission capacity to support the data communication desired by users.

Network cabling test instruments are designed with various functions for specific field tasks. They have different price, performance, and applications. Depending on the task that the test instrument performs in the field, it can be classified into one of three hierarchical groups: certification, qualification, or verification. While a few characteristics are common to many test tools, each group addresses a unique testing need and provides a different level of operational assurance. Another test solution, tone generator and probe kits, can be used to troubleshoot wiring installations. 

Certification instruments are the only tools that provide “pass” or “fail” information according to industry standards. In the North American market, the main industry standards body dealing with structured cabling transmission capabilities is the Telecommunications Industry Association (TIA). In international markets, the Electrotechnical Commission of the International Organization for Standards (ISO / IEC) creates and maintains standards for telecommunication cabling.

cnci certification

network cabling certification

 Whether it's installing a new cable or troubleshooting an existing cable, Ethernet network cabling testing has an important role in this process. Common tests for Datacom cabling include length, wiring diagram, loss, near end crosstalk, dc loop resistance, and return loss.

Networks continue to grow, as do the demands of the cabling infrastructure that must support them. New standards are continually being developed to provide guidance to cabling professionals when installing, testing, troubleshooting and certifying copper and fiber links. Whether it's 10BASE-T, 100BASE-TX, or 1000BASE-T networks, there are specific requirements and potential pitfalls in implementing these technologies. With the 10GBASE-T standard, it becomes even more important to keep abreast of the latest advancements in Ethernet cabling and network cable testing.

network cabling certification

cnci certification

Reno, Zola Predosa, Calderara di Reno, Sala Bolognese, San Giovanni in Persiceto, Anzola dell 'Emilia, Crespellano, Bazzano, Spilamberto, Castelfranco Emilia, San Cesario sul Panaro in the sector of installation and maintenance of civil electrical systems and industrial electrical systems , we also deal with data networks ,tv antennas for terrestrial and parabolas for digital satellite , alarms and closed circuit TV , intercoms , videophones , without neglecting the innovations such as leds and domotics industrial and civil with a particular interest to energy-saving industrial and energy saving civil . We have an internal design studio and we ourselves carry out the design of the electrical system and produce, in accordance with the law, the declaration of adequacy on MV / LV cabins , thedeclaration of compliance of electrical systems and declaration of conformity of electrical systems.

Donati Franco ec snc was founded in 1980 after years of experience and an infinite number of works such as installation of electrical systems and maintenance of electrical systems for the areas of Bologna and Modena ; has taken on its current corporate forms and dimensions since 1993. Our company operates successfully in the province of Bologna and Modena, and above all in the municipalities of Casalecchio

cnci certification

network cabling certification

The application of modern technologies allows us to operate and assist professionals (such as architects and / or surveyors) with innovative technical solutions such as LED lighting systems or functional systems for civil energy saving and industrial energy saving , without neglecting even the simple installation of intercoms or video intercoms .

Are you building a new house and looking for innovative solutions? Have you ever thought about LED lighting ? In addition to guaranteeing you a safe civil energy saving (but also designed for industrial energy saving), thanks to the extreme flexibility and transversality of the applications, it has the ability to provide excellent technical and functional performances: from the simple lighting of a room, perhaps also acting as a piece of furniture, to the creation of a modern shower with chromotherapy. At an industrial / company level, if we combine LEDs with other devices, such as photovoltaic panels, energy savings are ensured.

network cabling certification

cnci

Our company, even with the desire to maintain the acquired knowledge, does not neglect innovation, on the contrary, precisely to develop our experience more and more we study and implement fundamental innovations for our development and that of the customers who come to us both in the field civil and industrial. Our work, by our nature, is deeply linked to the area between Bologna and Modena and here we operate at the best of our abilities in various fields, fulfilling the various requests of our customers; our works can be in the civil field but not only.

cnci

network cable installer certification

 Currently, companies are "forced" to keep up with the times and the future as they once imagined has now arrived. Technology has made great strides in terms of automation but also relatively to simple industrial and civil energy saving . National and international regulations then demand a series of safety certifications and specific functionality that only companies like ours are able to produce.

Our work is deeply linked with the territory where we grew up and our will is to continue to grow with all those activities that have developed here such as companies with very advanced mechanics such that only in this area of ​​Emilia , between Bologna and Modena, specific forms of processing are carried out in order to attract customers from all over Italy and from all over the world. These companies are our customers and thanks to us, and we thanks to them, we have been able to grow and innovate. The industry can turn to us and we will know how to solve its problems. We are able to take full advantage of the technological resources available to ensure industrial and civil home automation first level. Automation is the new frontier of the industry as it guarantees savings, profitability and increased production.

network cable installer certification

certified network cable installer training

Our company can count on the professionalism and experience of its employees who have the opportunity to apply with dedication in various activities relating to the engineering as the ' installation of civil electrical installations , industrial electrical systems , perform maintenance of electrical installations operating on a vast territory such as the area between Bologna and Modena and the municipalities included in it such as Casalecchio di Reno, Zola Predosa, Calderara di Reno, Sala Bolognese, San Giovanni in Persiceto, Anzola dell'Emilia, Crespellano, Bazzano, Spilamberto, Castelfranco Emilia, San Cesario sul Panaro.

In fact, our work does not end with the installation of these systems but we also have the burden of producing the declaration of conformity for electrical systems that certify their correct functionality in safety according to the law and guarantee the customer himself on the quality of our work

certified network cable installer training

network cable certifications

Our fame derives not only from the competence and professionalism with which we carry out the installation work of electrical systems that are entrusted to us also from the fact that customers can always count on us for any eventuality. We are always there, even to take care of the maintenance of electrical systems wherever they are, even if they were not designed and built by us. An electrical system that is not working or has problems is a safety hazard for everyone, primarily for the customer who has to use it daily. Our maintenance of electrical systemsthey are always punctual, fast and safe in order to identify problems quickly and minimize the inconvenience for the customer. If you need an intervention we are close to you and ready to assist you being very present in the area. Donati Impianti is able to carry out maintenance work on electrical systems for the municipalities in the area between Bologna and Modena , including for example Casalecchio di Reno, Zola Predosa, Calderara di Reno, Sala Bolognese, San Giovanni in Persiceto, Anzola dell ' Emilia, Crespellano, Bazzano, Spilamberto, Castelfranco Emilia, San Cesario sul Panaro.

network cable certifications

network cable installer

 Everything that is electrical or related to electrical systems , both for civil but also and above all industrial uses, in particular for metalworking companies, is our daily bread and we are able to fulfill any request our customers ask us.

Given the experience that distinguishes us, it is we ourselves who often provide the ideal solutions to the problems posed to us by our customers. Especially in the industrial field, and even more so in metalworking companies, whose processing complexity often requires innovative solutions.

Our team is able to design and implement the installation of simple electrical systemsbut also to carry out complex studies and designs that often lead us to create prototypes for industrial machines as regards electrical and electronic components.

network cable installer

cable installer certifications

To be sure that your LAN network can really work at the speed you expect, contact Donati Impianti: we are able to provide you with the certification of the structured cabling system, which will guarantee and certify the compliance of the entire system with standards and requests you expected.

Donati Franco ec snc was founded in 1980 after years of experience and an infinite number of works such as installation of electrical systems and maintenance of electrical systems for the areas of Bologna and Modena ; has taken on its current corporate forms and dimensions since 1993. Our company operates successfully in the province of Bologna and Modena, and above all in the municipalities of Casalecchio di Reno, Zola Predosa, Calderara di Reno, Sala Bolognese, San Giovanni in Persiceto, Anzola dell 'Emilia, Crespellano, Bazzano, Spilamberto, Castelfranco Emilia, San Cesario sul Panaro in the sector of installation and maintenance of civil electrical systems and industrial electrical systems , we also deal with data networks ,tv antennas for terrestrial and parabolas for digital satellite , alarms and closed circuit TV , intercoms , videophones , without neglecting the innovations such as leds and domotics industrial and civil with a particular interest to energy-saving industrial and energy saving civil . We have an internal design studio and we ourselves carry out the design of the electrical system and produce, in accordance with the law, the declaration of adequacy on MV / LV cabins , thedeclaration of compliance of electrical systems and declaration of conformity of electrical systems.

cable installer certifications

certified network cable installer course

The certification of the LAN network is the verification of the compliance of the cabling with current standards (International Standard: ISO / IEC 11801; American Standard: EIA / TIA 568-B.1 and B.2).

With a view to constant innovation and research, we believe that it is not enough to use cables, Cat.6 sockets and 1Gb / s devices to obtain a network capable of working at 1Gb / s (and vice versa also Cat.5E cables could allow a 1Gb / s connection); it is in fact necessary that the same laying of the cables and the connections are carried out adequately, and the only way to ascertain this is to carry out the certification of the LAN network with a special instrument, certified and calibrated, which provides our customer with a report with the data connection, in order to verify the exact compliance with international standards.

certified network cable installer course 

certified network cable installer

Today the  LAN networks  are configured as the center of the corporate communication structure of every reality, one of the essential elements to allow the companies themselves to ensure and ensure productivity at optimal levels; in order for every company or private office to be competitive in an increasingly technological and globalized market, exploiting the available technologies, it is necessary that the LAN installer projects the LAN data network correctly and according to international standards, supporting his own installation by a certification that objectively verifies its characteristics and standards.

The Donati Impianti company, in addition to creating copper and fiber optic data networks, is equipped with the necessary tool for the certification of data networks , from copper ones up to category 6A (up to 10Gb / s), as well as networks in singlemode and multimode optical fiber (up to 10Gb / s).

certified network cable installer

certified network cable installer

When certifying your computer network, each wiring point is checked and each of the components that make up the wiring network is verified and guaranteed to comply with the regulations, is correctly installed and therefore, will offer the correct performance and reliability supporting any application network that conforms to these regulations.

Our certified cabling installation technicians know how to diagnose and troubleshoot high-performance cabling systems. As new high-performance cabling systems are developed and implemented, every aspect of the installation demands a higher level of capacity and greater attention to detail. New check parameters have been added. Links have to be tested using one of the two link models (the 'permanent link' or the 'channel') and are tested and evaluated over a wider frequency range and with more data points. The components from which the links are built should provide better performance and the quality of the finish during installation should improve accordingly.

certified network cable installer

certified network cable installer course

In this case, if there are wiring points that give the result "NO PASS", our Technical Department will diagnose the links or points that fail and after implementing a corrective action, they will recheck them to ensure that they meet the relevant transmission requirements and pass the certification.

The certification of a cabling system demonstrates the quality of the components and the installation and requires that the cabling links provide the “Pass” result. If there are Faults, the network does not comply with the regulations or with the minimum guarantees required for operation.

As new cabling systems are developed and implemented, higher performance, greater security and availability are required, the Cabling Certification is the only legal guarantee that ensures the availability of a network that meets the standards and guarantees required.

certified network cable installer course 

cable installer certifications

Professional Techniques, as a Telecommunications installation company registered in the Generality of Catalonia, offers the Certification service included in all network installations or wiring points, as well as our network specialists analyze, verify and manage any incident in a wiring network , always starting from a wiring certification as the basis for the guarantee of operation and installation

Network installation companies must be professionals and specialized to install voice, data and video cabling and for this, in addition to the corresponding legal accreditation and specific training, they must have the necessary technical means and know how to certify the network cabling, diagnose and fix problems that may occur in high performance cabling systems.

cable installer certifications

network cable installer

When certifying your computer network, each wiring point is checked and each of the components that make up the wiring network is verified and guaranteed to comply with the regulations, is correctly installed and therefore, will offer the correct performance and reliability supporting any application network that conforms to these regulations.

The certification of the cabling becomes an essential documentation, it will officially certify the guarantee and efficiency of the computer network.

network cable installer

network cable certifications

The certification of a cabling system demonstrates the quality of the components and the installation and requires that the cabling links provide the “Pass” result. If there are Faults, the network does not comply with the regulations or with the minimum guarantees required for operation.

In this case, if there are wiring points that give the result "NO PASS", our Technical Department will diagnose the links or points that fail and after implementing a corrective action, they will recheck them to ensure that they meet the relevant transmission requirements and pass the certification.

The certification process includes the certification measurements of the cabling and the generation of reports and documentation of the network.

network cable certifications

certified network cable installer training

As new cabling systems are developed and implemented, higher performance, greater security and availability are required, the Cabling Certification is the only legal guarantee that ensures the availability of a network that meets the standards and guarantees required.

The certification of a structured cabling network or computer cabling network is the process by which the installation is guaranteed to comply with official regulations.

In the certification process, the transmission performance of an installed cabling system is compared with the standard determined using methods defined by to measure correct performance.

certified network cable installer training

network cable installer certification

Structured Cabling Networks or Computer Networks are the most important infrastructure of communications systems: On these cable networks, absolutely all the systems of a company will be supported and also, a cabling network is a long-term investment.

Network installation companies must be professionals and specialized to install voice, data and video cabling and for this, in addition to the corresponding legal accreditation and specific training, they must have the necessary technical means and know how to certify the network cabling, diagnose and fix problems that may occur in high performance cabling systems.

network cable installer certification

cnci

The certification of an installation means that all the cables that compose it comply with certain reference standards and, therefore, you have the guarantee that they will comply with the requirements for which they were designed . For example, category 5 and class D UTP cables, the length of the segment must not exceed 90m, the must be taken into account, etc.

In general, current networks are very stable. However, they are also characterized by not being static. Both companies and users demand the installation of new technologies, new services and better performance that inevitably requires changing the infrastructure, implementing new applications and managing security. At the same time, it is necessary to control IT costs and minimize the interruptions that are generated. Therefore, it is necessary to be able to study each aspect of the network to accurately assess the impact that the incorporation of new technologies and services has on it, and to ensure that maximum performance is obtained at all times.

cnci

network cabling certification

Our certified cabling installation technicians know how to diagnose and troubleshoot high-performance cabling systems. As new high-performance cabling systems are developed and implemented, every aspect of the installation demands a higher level of capacity and greater attention to detail. New check parameters have been added. Links have to be tested using one of the two link models (the 'permanent link' or the 'channel') and are tested and evaluated over a wider frequency range and with more data points. The components from which the links are built should provide better performance and the quality of the finish during installation should improve accordingly.

Due to the increasing complexity of these cabling systems, determining the cause of failure and quickly restoring proper performance has become a challenge . This manual will guide you through the process of troubleshooting advanced structured cabling systems using the Fluke Networks CableAnalyzer ™ DSX-5000 Series certifier so you can increase productivity and deliver greater value to your business.

network cabling certification

cnci certification

 The structured cabling certification process that we carry out at Unite-Assisted DE Telecommunications begins after the completion of the cabling installation. The certification of the structured cabling is a process that compares the transmission performance of a cabling system is installed with a given standard, using a method defined by the standard for measuring said performance .

This certification of a structured cabling system shows us the quality of the components and the installation, that is, it tells us if it complies with connectivity and correct operation. This is usually necessary to obtain the manufacturer's warranty for structured cabling.

The structured cabling certification process will require that the cabling links provide the 'Pass' result . If not, our qualified and certified technicians will diagnose the failing links and, after taking corrective action, recheck them to ensure they meet the relevant transmission requirements. The time required to certify a facility includes not only the completion of the certification measurements, but also documentation and troubleshooting.

cnci certification

cnci certification

The purpose of mandatory certification is to confirm that the product meets the minimum safety requirements, and voluntary certification is to show the consumer that the manufacturer is responsible for the declared properties and quality indicators of the product.

The list of goods subject to assessment for compliance with the industrial safety requirements was On the approval of the list of products, which for placement under customs regimes providing for the possibility of alienation or use of these products in accordance with their intended use on the territory of the Russian Federation,

Remove the micros card. To remove the back cover, do the following: a Remove the Mylar cover The screw cover on the back cover is made of a Mylar sticker. To remove the screw, use a standard Philips screwdriver and pierce the Mylar cover. Once the Mylar covers have been removed, they cannot be replaced and the screws are now undercoated. b Remove the mounting screws that secure the back cover to the computer Disassembly and reassembly 

cnci certification

cnci

All rights reserved.  and other trademarks are the property of Dell Inc. or its trademarks. Other trademarks are the property of their respective owners.

Disassembly and reassembly Recommended tools The following tools may be required for the operations in this document: Phillips screwdriver # 0 Phillips screwdriver Plastic rod Phillips screwdriver is for screws and Phillips screwdriver is for screws  for screws Removing a Card  Follow the procedure in Before Shipping to Your Computer. 

Press in on the micros card to remove it from the computer. Remove the micros card from the computer. To insert a micros D card Slide the card into the slot until it locks into place. Insert the micros card.Follow the procedures in After Shipping to Your Computer. Back Cover To remove the back cover Follow the procedures in Before Working Inside Your Computer.

cnci

network cable installer certification

Working with a computer 5 by using a wrist grounding strap or by regularly touching an unpainted metal surface, such as the interface on the back of the computer.  Remove any installed express cards or smart cards from the slots. Working with a computer 

Notes, Precautions, and Warnings  indicates important information that helps you make better use of your device.indicates either potential damage to hardware or loss of data and tells you how to avoid problems.indicates a potential for property damage, personal injury, or death to Dell Inc. its subsidiaries. 

network cable installer certification

certified network cable installer training

If your computer has an  port, first disconnect the network cable from the computer and then from the network device. 4 Unplug the computer and all attached devices. 5 Open the screen. 6 Press and hold the power button for a few seconds to ground the system board.

To reduce the risk of electric shock, unplug your computer from the electrical outlet before proceeding to step 8. To reduce the risk of electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as the back of the computer. 

Remove any installed express cards or smart cards from the slots. Working with a computer 5 by using a wrist grounding strap or by regularly touching an unpainted metal surface, such as the interface on the back of the computer.Remove any installed express cards or smart cards from the slots.

certified network cable installer training

network cable certifications

Handle components and cards with care. Do not touch the components or contacts on the card. Hold the card by the edges or by a metal mounting bracket. Hold a component (such as a processor) by its edges, not by its contacts.  When removing the cable, pull on the plug or pull-tab, not on the cable. 

Some cables have a plug with a locking tab; if you remove such a cable, press the locking tabs before removing the cable. When unplugging, pull all sides evenly so as not to bend the pins. Also, make sure that both terminals are oriented and aligned before connecting the cable. 

The color of your computer and certain components may look different from what is shown in this document. Before you begin shipping inside your computer 1 Make sure your work surface is flat and clean so that you do not scratch the computer cover. 2 Turn on the computer. 3 If possible, disconnect all network cables from the computer. 

network cable certifications

network cable installer

Before working inside your computer, read the safety information that shipped with your computer. More information on good safety practices can be found on the compliance website at Many repairs may only be performed by a certified service technician. Troubleshooting and simple repairs should only be performed as permitted in your product documentation or as directed by online or telephone service and support. 

Damage to your computer caused by unauthorized service by Dell is not covered by the warranty. Read and follow the safety instructions that came with the product. To prevent electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface that is grounded to the ground before touching the computer for disassembly. 

network cable installer

cable installer certifications

Working with your computer Safety instructions To help protect your computer from damage and to help ensure your safety, use the following safety instructions. Unless otherwise noted, each procedure in this document assumes that the following conditions are true: You have read the safety information that shipped with your computer. 

The component can be replaced or, if purchased separately, installed in reverse order to the removal procedure. Disconnect all power sources before opening the computer cover or panels. After you have finished working inside your computer, replace all covers, panels, and screws before reconnecting the computer. 

cable installer certifications

network cabling certification

The advantages of system cabling over non-system cabling are the well-tested compatibility of network components, the manufacturer's 20-year user warranty, the convenience of data network network planning tools, and certified installers trained by the manufacturer. 

The system cabling manufacturer also undertakes the training of installers to ensure the correct installation of its cabling system and the resulting unavoidable reliability. When ordering system cabling, always install a certificate from a certified installer of this cabling system. 

The certificate is issued to the installer by a foreign cabling system manufacturer and is named after the installer, and certifies that this person has successfully completed the courses for the installation of this cabling system.

network cabling certification

certified network cable installer

Classical computer network cabling uses well-known twisted pair cabling. Each floor of the building has a floor distribution, from which copper twisted pair cables exit to the sockets of the workstation computers, to which the network sockets of the computers are connected by means of a device cable (patch cable).

Thus, the network cables from each workstation run together into the corresponding panel sockets in the floor distributor. In the same floor distribution, there is also a network device (switch), which connects network cables from different workstation computers into a uniformly operating network. 

However, either fiber optic or twisted pair cable leaves each floor divider and in turn goes to the building divider, for example on the basement floor of the building, and the network device there (switch or router) in turn connects these information guides into a single data communication network.

certified network cable installer

certified network cable installer

However, the cable products for which the declaration is issued also undergo certain tests and visual inspection to confirm compliance with the requirements of the following national standards:

Each manufacturer is interested in improving the competitiveness of their products. Therefore, in addition to mandatory certification, there is a voluntary one - it helps to inspire confidence in the buyer and take an appropriate place not only in the Russian, but also not in the international market.

The purpose of mandatory certification is to confirm that the product meets the minimum safety requirements, and voluntary certification is to show the consumer that the manufacturer is responsible for the declared properties and quality indicators of the product.

The list of goods subject to assessment for compliance with the industrial safety requirements was On the approval of the list of products, which for placement under customs regimes providing for the possibility of alienation or use of these products in accordance with their intended use on the territory of the Russian Federation, is subject to mandatory confirmation of compliance with the requirements of the Federal Law "Technical Regulations on Fire Safety Requirements". In addition to fire-resistant cables, it includes cable penetrations, ducts, channels and other cable products.

certified network cable installer

cable installer certifications

Declaration is another form of confirmation of compliance of cable products with established requirements.The declaration procedure is as follows:

The manufacturer draws up a declaration in the form established by the legislation of the Russian Federation;the document is submitted to an accredited certification body for registration in the State Register.

It should be noted that the applicant company is responsible for the information entered in the declaration, and not the certifying organization, as is the case with the certificate. Thus, the manufacturer is responsible for the quality of the products.

cable installer certifications

network cable installer

The above studies are carried out by an accredited laboratory, which issues a protocol confirming the successful completion of all tests. On the basis of the protocol, the certification body, certified in accordance with the established procedure, draws up a certificate of conformity.

Products that have passed certification are marked with a single mark of circulation on the market. For more information on the labeling rules for certification products, click here determination of the mechanical properties of the insulating layer.

network cable installer

network cable certifications

It should be noted that in addition to the technical regulations of the CU, there are Russian regulations governing the mandatory certification or declaration of certain types of cable products.

So, in the Decree of the Government of the Russian Federation No. On the approval of a unified list of products subject to mandatory certification, and a unified list of products, the conformity of which is confirmed in the form of a declaration of conformity" it is said that

 measurements and other manipulations, with the help of which it is possible to identify non-compliance with standard dimensions and / or to detect a violation of the requirements for the design of the product.

network cable certifications

certified network cable installer training

This regulation covers cable products  intended for operation in alternating current networks with voltages from  and direct current with voltages from 75 to  (inclusive), including:

cable products for non-stationary laying (mine, power flexible cables and wires for electric arc welding, multi core flexible suspension cords, etc.).

The above products can be approved for sale and use only after passing the certification procedure and obtaining the corresponding certificate.

certified network cable installer training

network cable installer certification

Mandatory certification according to the requirements of the technical regulations of the Customs Union "On the safety of low-voltage equipment" is provided for the release into circulation of cable products intended for use at a rated voltage of 50 to 1000 V (inclusive) AC and from 75 to 1500 V (inclusive) DC. Among such cables and wires are

Obtaining a certificate of conformity within the framework of the requirements of Russian legislation is mandatory for the production of cables for voltages above 1000 V. These products include power cables for non-stationary laying:

 

the technical regulations of the Customs Union "On the safety of low-voltage equipment" came into force - a legal document that establishes requirements for electrical products that are binding on all EAEU member states.

network cable installer certification

cnci

The company "Novotest" will assist in the design and issuance of mandatory certificates for various cables and wires, if necessary, our experts will help with filling out the declaration for cable products and registering it.

Cable products for voltages up to 1 inclusive) are subject to the legislation of the Customs Union, other cables and wires (for voltages over 1 must still be manufactured in accordance with the requirements of the national system.

In the manufacture of cable products, it is necessary to be guided by the permissible voltage when using them. Depending on the restrictions, cables and wires are subject to different documents

cnci

network cabling certification

The registered declaration of conformity for cable products is valid only on the territory of the Russian Federation. The declaration of cables, wires and cords is carried out with the participation of a third party - an accredited testing laboratory. 

It is impossible to accept the declaration on its own grounds: in any case, it is required to submit to the certification body the test reports carried out by the specialists of the accredited laboratory. 

The basis for issuing a certificate both in the  system and in accordance with the requirements of the Customs Union, as well as registering a declaration, is full compliance with the established safety requirements. 

network cabling certification

cnci certification

The certificate of conformity to the requirements of the Customs Union is valid in all three member countries of the union. There is no need to obtain additional permits confirming compliance with safety standards. 

The first thing to note, when certifying cable products is the fact that the issued certificate in the  system is valid only on the territory of our country, for the sale of cables, wires and cords in other countries, it is imperative to obtain permits in accordance with the requirements of that state

As for the certificate of conformity to the norms of the Customs Union, its scope of distribution is much wider: with such a document, cable products can be put into circulation not only in Russia, but also in Belarus and Kazakhstan. 

cnci certification

cnci certification

The device confirms this and records it in a standardized form. The second important piece of information in the term "cabling certifier" is "cabling". This means that such measuring devices do not evaluate the components individually, but evaluate the data path as a whole, usually consisting of a data socket, distribution panel and data cable in between. 

This fact is often not taken into account in practice, because many installers still believe that the installation cable, for example, is the only determining element.The classic at this point: The installer who terminates a Category 7 data cable with "cheap" Category 5 sockets and panels and complains terribly that his measuring device "already" "fails" with Category 6 measurement indicates, although it measures far below the suitability of the data cable

cnci certification

cnci

These do not determine any measured values, but only exchange data packets between the end points of the routes and count whether and how many bits or packets have been lost on the route in order to deduce whether a data route is used to transmit a certain protocol (usually 1 Gigabit Ethernet ) suitable is. 

One level below you will find the so-called verifiers, basically just simple wiring testers that check the correct assignment of the lines, without any information on the suitability or transmission properties. 

Cabling certifiers, on the other hand, carry "correct" Measurements of many individual parameters, including simple DC properties such as loop resistance, as well as demanding high-frequency variables such as the insertion loss of a transmission channel or crosstalk between the channels. 

cnci

network cable installer certification

This usually happens not just once in the product cycle, but with regular repeat tests on production devices - as an external quality assurance, so to speak. The knowledgeable user of measurement technology also knows, however, that accuracy is fleeting and has to be verified again and again. 

In practice this means that measuring devices do not lose their level classification by design, but the specifications are constantly changing due to aging and environmental influences. Therefore, all manufacturers of measuring devices indicate periods in which the specifications are reliably met. 

This period is typically twelve months for field measuring devices for LAN installations. After this time, the manufacturer should check the device for compliance with the measurement accuracy and readjust it if necessary.

network cable installer certification

certified network cable installer training

If someone carries out class FA measurements, for example, they have to use a device that also covers the entire frequency range from 1 MHz to 1,000 MHz and does not just offer a shortened range. On the other hand, the device must have the correct accuracy for this area of ​​application. 

This is expressed by the cabling certifies as "level" accuracy (Table 1). "Level V" accuracy is required for the class FA measurements mentioned. Using a device that is not accurate enough is similar to trying to measure graph paper with a ruler. The results are far too imprecise to show the actual parameters. 

The technician should therefore always make sure that he only works with devices with confirmed and suitable measuring accuracy, because in the worst case it can otherwise lead to major problems when the system is later operated. The well-known manufacturers of the measuring devices guarantee compliance with the level ac-curacies by giving their devices to neutral laboratories, which check and document compliance with the required ac-curacies. 

certified network cable installer training

network cable certifications

 However, the ease of use often tempts people who are not familiar with this type of measuring device to be sent to the construction site in the hope that it will work out. But this usually goes wrong. The measurement often fails when the correct standard is set. As easy as the devices are to operate, one should nevertheless have a certain background knowledge of the performance classes and expressions to be set, such as "NVP value", "Permanent Link" or "Channel Link", and the common names of the test parameters should also be known. 

The manufacturers of the measuring devices as well as independent training houses constantly offer training courses that convey this knowledge. A know er will also be able to select the appropriate measuring device to properly certify its wiring. Here, too, there are some rules that are important to get a reliable statement. 

network cable certifications

network cable installer

Nowadays, all components of a data link are equally important for the performance of the link. The old saying that "the weakest link determines the performance of the entire chain" also applies here. The picture on the left shows the Wiretapper 4500 as an example of a measuring device, which, according to the manufacturer, is the first measuring device that already covers the future frequency range of category 8, namely 2,000 MHz. 

An important element of this service chain during installation is of course the personnel who carry out the acceptance measurements. The cabling certifies currently used on the market manage the balancing act of accommodating complex high-frequency four-pole measurements, which are carried out in laboratories with very expensive and complex vector network analyzers, in a portable hand-held device, packaging them for construction site use and providing the whole thing with a user interface, which leads to the desired acceptance protocol even without a university degree.

network cable installer

cable installer certifications

Sometimes complex parameters from individual measurements have to be mapped mathematically, such as various ACR values, which in principle express the signal-to-noise ratio. A "service-neutral" statement about the performance class of the system then results from the overall consideration of all parameters, which in turn allows conclusions to be drawn about the possible applications and protocols to be transmitted. 

The device confirms this and records it in a standardized form. The second important piece of information in the term "cabling rectifier" is "cabling". This means that such measuring devices do not evaluate the components individually, but evaluate the data path as a whole, usually consisting of a data socket, distribution panel and data cable in between. 

This fact is often not taken into account in practice, because many installers still believe that the installation cable, for example, is the only determining element.The classic at this point: The installer who terminates a Category 7 data cable with "cheap" Category 5 sockets and panels and complains terribly that his measuring device "already" "fails" with Category 6 measurement indicates, although it measures far below the suitability of the data cable. 

cable installer certifications

certified network cable installer

These do not determine any measured values, but only exchange data packets between the end points of the routes and count whether and how many bits or packets have been lost on the route in order to deduce whether a data route is used to transmit a certain protocol (usually 1 Gigabit Ethernet ) suitable is. 

One level below you will find the so-called verifies, basically just simple wiring testers that check the correct assignment of the lines, without any information on the suitability or transmission properties. 

Cabling certifies, on the other hand, carry "correct" Measurements of many individual parameters, including simple DC properties such as loop resistance, as well as demanding high-frequency variables such as the insertion loss of a transmission channel or crosswalk between the channels. 

certified network cable installer

network cabling certification

 The "structured cabling" represents the backbone of modern data communication. In order to be able to guarantee the smoothest possible operation of a network, a professional acceptance measurement must be carried out after the passive lines have been installed. Crucial: Both the technicians and the measuring equipment used must be suitable for this task. 

Before measuring the first route, let alone looking for errors on a route, the technician should be aware of some essential aspects in order to reach the destination safely to come: The devices with which he carries out these measurements on the cabling links are called "cabling certifies" by insiders. 

This long word already contains two important pieces of information: On the one hand, "Certification", which clearly presupposes that these devices actually carry out correct measurements on the laid data links, not just simple transmission tests like the so-called qualifiers or liquidators.

network cabling certification

certified network cable installer

 Summary: The testers are the certifies to prove that the installed cabling meets the strict performance requirements specified by the  standards. The precise testers not only find defective components and installation errors, but also give the installer the security that the network installation has been carried out correctly and that the required transmission capacity is guaranteed.

You can find out more about the testing and measurement technology offered by Networks for testing and certification on our website .

Finally, a tip: an Ethernet infrastructure for data rates of 10 Gbit / s and higher should always be measured and certified by experts. This can be done by the specialists of the company installing the infrastructure. Measuring and certifying the cabling costs money, but in the experience of network experts there are solid reasons that speak for it

certified network cable installer

cable installer certifications

When testing a permanent link (PL), only the installed cabling (shown in green in the figure) is checked with a special PL adapter with inexpensive, exchangeable RJ-45 contact inserts - special RJ-45 patch cables are no longer required. In this case, the test includes the connection at the patch field and the data socket at the workplace plus about 2 cm of the test line of the PL adapter. This is the most common test performed in the field, as it tests all components for which the installer is responsible. On the other hand, those patch cables that the customer can replace themselves are not checked, so that the results of such a certification would be worthless.

Think of a LAN cable certifies as a test tool that tests the third element of a cabling system. The first two elements are the cable and the connectors, which have already been carefully checked by the manufacturer. The third element is the on-site installation of these components. High quality connectors and cables provide the specified performance parameters when correctly installed under laboratory conditions. But installation in the field differs significantly from that in the laboratory. During installation under real operating conditions, it can happen that the cable is stretched, kinked, squashed, installed in areas with higher temperatures or with high humidity and possibly incorrectly connected.

cable installer certifications

network cable installer

When setting up the certifier to perform tests on the cable, the required performance standard and the existing cable configuration must be selected. When certifying cabling systems in office buildings, you have the choice between the channel link and the permanent link.

The channel link comprises the installed cabling and the connection cables (patch cables) with which the network device is connected to the cabling. In Figure 1 the permanently installed cabling, which is referred to as permanent link (PL), is shown in green, the patch cables are shown in purple. The measurement begins approx. 2 cm behind the certifier's channel adapter and includes the patch cable and the connector to the distribution field (patch field) up to the data socket at the workplace. The connection to the channel adapter is not taken into account in the test. The black crossbars with the stop / go symbols indicate which elements of the cabling are being tested.

network cable installer

network cable certifications

In contrast to this, the cable standards specify the performance parameters of pure cables without connectors. As with the components, it can therefore be assumed that a data cable labeled “Category 6A” meets the performance requirements that standardization places on this category. Manufacturers develop, produce and test their products in accordance with the standards for components and cables.

The third category of performance requirements - that applies to cabling - is of interest to service technicians because it relates to the installed cabling. The cabling standards define the performance parameters of complete, installed transmission links (link and channel) consisting of cables and connectors that must be tested "on site". These on-site tests are critical, however, as the permanent and channel link performance determine whether the network devices are functioning properly and the network is providing the agreed bandwidth.

network cable certifications

certified network cable installer training

 Certifiers are the best solution to demonstrate and document that the cabling installed meets the stringent performance requirements set by  standards. In addition, the precise testers not only find defective components and installation errors, but also give the installer the certainty that the components installed by him are actually high quality original products.

In the following, the most important current standards for the certification of LAN cabling are explained as well as channel and permanent link tests.

The standards specify three different types of performance requirements for components, cables and the processed components including processing in interaction. The standards for network components define the performance parameters of the sockets 

certified network cable installer training

network cable installer certification

 A criterion for a certifies is the fulfillment of the accuracy requirements according to the and standards and the verification of the accuracy according to  Level

You can also recognize a certifies by the technical specifications. If the tester supports measurements on , return loss, insertion loss and as well as a frequency range of at least 500 MHz, then it is clearly a certifies.

Since the acquisition of a certifies means a not inconsiderable investment, Networks offers a “Pay As You Test” option . As part of this campaign, the portfolio of certifies can be converted from a capital-binding investment to a business expense. At , the installer can buy a certain test credit for his cable certifies, which can be easily refilled at any time if required. There is also the choice between the  purchase option, in which the meter belongs to the installer after a down payment, or a free loan option. In the latter case, the meter remains the property of Networks  a deposit is not required.

network cable installer certification

certified network cable installer training

 In contrast, the standardization organizations have not developed any test, performance or accuracy specifications for the qualification of cables. The qualifiers have the discretion of the manufacturer to determine which parameters are tested, what accuracy the tester provides and how the results are output.

Another problem is that the results of testers from different manufacturers cannot be compared. In addition, the good / bad limit values ​​are not defined so that the installer does not know why the qualifier has rated a cable as “bad”.

For the reasons mentioned, no manufacturer of cables or connectors will accept test results for certification or any warranty claims that have been determined with a qualifier. It is often not easy for the installer to immediately recognize whether the tester is a qualifier or a certifies. However, since a certifies has to meet defined criteria, identification on closer inspection is relatively easy.

certified network cable installer training

network cabling certification

However, the valid cabling standards must be observed. The two most important standardization organizations for LAN cabling are the international ISO / IEC with the 11801 series of standards and the American ANSI / TIA with its 568 series. These standards define the performance requirements for components, cables and all cabling.

The manufacturers use the standards for components and cables to develop and test their products. The cabling standards, on the other hand, are relevant for the technician who has to test the installed cabling in the field. You define the performance parameters of the entire transmission link (link and channel), consisting of cables and connectors. These on-site tests are important because the link and channel performance determines whether the network is working properly and is providing the desired bandwidth.

So why is a certifies and not a qualifier needed? This is due to the standards on which the certification is based, because the test and accuracy requirements of cable certifies were defined in close relation to the performance requirements for the cabling.

network cabling certification

cnci certification

 LAN cable certifies are the first choice when it comes to certifying twisted pair cabling. But why should installers even certify the cabling? And what is the difference between a certifies and other devices from the LAN tester category? Dan Barrera,  Networks Global Product Manager, has the answers.

The first two elements of  cabling are the cable and the connectors. The third is the entire installation of these components. And it is precisely this element that the LAN cable certifies tests. High-quality connectors and cables meet their performance promise 100% when they are installed under laboratory conditions. But on-site installation has significantly different requirements.

When installing under real conditions, it can happen that the cable is stretched, kinked, squashed, installed at high air temperatures, in high humidity or not properly connected. The installers must test the attainable performance characteristics of the cabling to ensure that the installed components result in an equally high quality and complete cabling system.

cnci certification

cnci certification

Do you want to create a wired or wireless  local network  to connect PCs at home or in the office? Do you want to share a single ADSL Internet connection between multiple computers? For these and other needs of the same type, BFG Informatics thinks about it in Vicenza and its province !

cnci certification

certified network cable installer training

The certification of a LAN network is particularly important in order to meet the requirements set by the legislation in force in compliance with industry standards in order to avoid anomalies in the wiring with consequent degradation in terms of performance. 

certified network cable installer training

network cable installer certification

This service also allows the installer to be released from any disputes on the actual operation of the network and finally to generate a document that certifies the health of the network. This allows us to offer our customers full guarantee of the system built.

network cable installer certification

certified network cable installer training

The test and certification of the data network allows us to clarify the wiring, this will allow us to understand which cables work and which do not, the services that can be supported by the working cables and the type of intervention to be implemented for those not working.

certified network cable installer training

network cable certifications

Network infrastructures are physically connected and it is essential that the quality and quantity of what they transmit are not altered.CP Solution certifies copper networks since with no number of outlet points using a high-level instrumentation

network cable certifications

network cable installer

The certification of the copper network is essential for both large installations and small systems and serves to certify the belonging of a wiring / infrastructure to a specific category or class of performance, ensuring the correct transport of all present and future applications compatible with that class or category. 

network cable installer

cable installer certifications

Since 2006, the most important network, the Gigabit network, appears on the market. Today copper networks are still a very valid and economical alternative because they are easy to wire and less delicate and complex than optical fiber.

cable installer certifications

network cabling certification

The advent of the 5e class has led to the development of peripherals and hubs which have then been transformed into switches, ie intelligent exchanges. Copper reflectors, network verification tools, are beginning to spread, given the need to understand the dark sides of the copper network. 

network cabling certification

certified network cable installer

In the nineties the 10 / 100mb cat5 data network over cable with four pairs of conductors but used in pairs of 2 (half duplex), was the first technology available on the market and as such, the performance and speeds were poor. 

certified network cable installer

certified network cable installer

As a result, when a problem occurs, it is increasingly difficult to identify the origin of the degradation that impact your users and your business. Ditto when it comes to challenging your various IT suppliers on an application linkage chain or controlling the impact of your changes.

certified network cable installer

cable installer certifications

IT Performance is the discipline allowing the measurement, analysis and more reactive management, or even proactive, of the performance and efficiency of the information system today, applications are more and more complex, dynamic and interconnected. 

cable installer certifications

network cable installer

The performance problems of application services are multiplying for many converging reasons digitization of business acts, agile development and reduction of Time to Market, generalization of services in mode, virtualization and  containerization.

network cable installer

network cable certifications

Depending on their level of expertise, these tools certify the ether net cabling by performing reliable and rapid test reports, self-tests and measurements. These rectifiers thus make it possible to know if the cabling is in conformity.

network cable certifications

certified network cable installer training

For the certification of Ethernet cabling to be reliable, it is necessary to use tools adapted to the different installations. Outside of Fluke certification, Lofting IT Networks also offers rectifiers adapted to different cabling systems. 

certified network cable installer training

network cable installer certification

Analyzing and solving problems or by providing intelligible analysis reports. The certification of Ethernet cables is possible thanks to various tools. Their choice is made according to the type of installation, whether it is copper or fiber optic cabling.

network cable installer certification

certified network cable installer training

In order to proceed with the certification of Ethernet cables, several solutions exist. Among them,Fluke networks and its Versifier range presents a complete offer. This solution aims to simplify the life of IT teams by remedying the tester's configuration issues. 

certified network cable installer training

cnci certification

In order to offer an analysis of network performance consistent with current infrastructures, Ethernet certification is carried out through universal tools. These are suitable for both copper cabling and optical transport networks.

cnci certification

network cabling certification

To stay in compliance with the new standards, certification of Ethernet cables is essential. Ethernet certification guarantees network performance. To do this, the IT teams use rectifiers to provide reliable information on the network and the compliance of cabling installations. 

network cabling certification

cnci certification

Link Ware cable test management software allows you to monitor all results from multiple testers using a single PC software Stats, providing a comprehensive view of the performance of your entire business cabling Compliance with current standards, with the possibility of configuring

cnci certification

certified network cable installer training

which translates into network failure, wasted resources and lost power. income matter. This can be avoided through cable installers who are able to certify that cable installations are up to industry standards and through network technicians who can find faults quickly. 

certified network cable installer training

network cable installer certification

Many companies will rely on a hybrid cloud environment that consists of private cloud infrastructure and public cloud services Companies expect their twisted pairs to perform flawlessly, but cut corners during design, installation and testing, 

network cable installer certification

certified network cable installer training

With MPO, there are more opportunities for errors in connections, because the technology is a lot more complex. Read more about MPO Technology here Contractors are also facing changes in the way data centers are designed and established as more organizations turn to a cloud computing model. 

certified network cable installer training

network cable certifications

Many organizations are gearing up 100 for fiber optic transmission above the gigabit, and this will include the use of Multifiber connectors. MPO's connectors are new to many cable installers and users alike, so there will be a learning curve. 

network cable certifications

network cable installer

The global market for fiber components is projected. Growth will be driven by Growing demand for bandwidth and the consequent need for fiber broadband, as well as the solid growth of mobile Internet and other factors, the company indicates.

network cable installer

cable installer certifications

Another trend is the use of fiber optics in business facilities. Many organizations are installing fiber as the demand for bandwidth continues to increase. According to a report on the Fiber Optic Components Market by Global Industry Analysts Inc. 

cable installer certifications

network cabling certification

If the application is intended to be a 24-meter permanent link with two 3-meter cords at each end, the standard will also include debating coefficients for cords of different gauges.

network cabling certification

certified network cable installer

cabling is designed to operate at  and for anyone new to installing and testing shielded cable, now is the time to start learning. Good news for installers is that Category 8 systems will use common connectors. 

certified network cable installer

certified network cable installer

The certification of a  network is particularly important in order to meet the requirements set by the legislation in force in compliance with industry standards in order to avoid anomalies in the wiring with consequent degradation in terms of performance. The certification procedure we carry out involves carrying out various tests on the wired system.

certified network cable installer

cable installer certifications

This service also allows the installer to be released from any disputes on the actual functioning of the network and finally to generate a document that certifies the health of the network. This allows us to offer our customers full guarantee of the system built.

cable installer certifications

network cable installer

The test and certification of the data network allows us to clarify the wiring, this will allow us to understand which cables work and which do not, the services that can be supported by the working cables and the type of intervention to be implemented for non-functioning ones. 

network cable installer

network cable certifications

 Network infrastructures are physically connected and it is essential that the quality and quantity of what they transmit are not altered Solution certifies copper networks since  with no number of outlet points using a high-level instrumentation:

network cable certifications

certified network cable installer training

small systems and serves to certify the belonging of a wiring / infrastructure to a specific category or class of performance, ensuring the correct transport of all present and future applications compatible with that class or category. 

certified network cable installer training

network cable installer certification

Today copper networks are still a very valid and economical alternative because they are easy to wire and less delicate and complex than optical fiber.The certification of the copper network is essential for both large installations

network cable installer certification

cnci

Copper reflectometers, network verification tools, are beginning to spread, given the need to understand the dark sides of the copper network. Since 2006, the most important network, the Gigabit network, appears on the market. 

cnci

cnci certification

 The advent of the 5e class  led to the development of peripherals and hubs which were then transformed into switches, i.e. intelligent exchanges. 

cnci certification

network cabling certification

In the nineties, the cat5 10 / 100mb data network over cable with four pairs of conductors but used in pairs of 2 (half duplex), was the first technology available on the market and as such, performance and speeds were poor. 

network cabling certification

cnci certification

Everything that is electrical or related to electrical systems , both for civil but also and above all industrial uses, in particular for metalworking companies, is our daily bread and we are able to fulfill any request our customers ask us.

cnci certification

cnci

provides a greater number of data on the characteristics of the transmission media, introduction of stricter tests to check copper cable categories, more in-depth discussion of the aspects of grounding in consideration of the fact that the use of shielded twisted pairs is introduced.

cnci

network cable installer certification

lightly different nomenclature for the elements making up the wiring,introduction of the concept of work classes to define the minimum requirements of a connecting section,widening of the range of types of cable that can be used, both in terms of copper and optical fiber, with the inadmissibility of the use of coaxial cables.

network cable installer certification

certified network cable installer training

The services provided by corporate LANs to any meeting room or office, guaranteeing when and where performance comparable to that provided by wired systems is needed.The rules and standards underlying the plant engineering of data transmission networks.

certified network cable installer training

network cable certifications

Fundamental importance for the company (eg buildings of architectural interest, insurmountable obstacles, impossible physical connections, etc.). The access points and network cards, both in PCI and PC Card technology.

network cable certifications

network cable installer

Maximum distance of 100 meters and thanks to the dynamic variation of the connection speed and the load balancing it allows always reliable connections.Easy to install and use, the system is very useful in environments where the impossibility of laying cables.

network cable installer

network cabling certification

The Wireless system allows you to connect Desktop PCs and Portable PCs to the LAN without the need for physical connections via cable. Each access point allows the simultaneous connection of 63 clients

network cabling certification

cable installer certifications

system is connected to the public network and therefore the declaration of conformity pursuant to art.If, on the other hand, the structured cabling system is not connected to the public network, it fully falls within all the obligations envisaged

cable installer certifications

certified network cable installer

Following various provisions to repeal the legislative provisions governing telephone systems, the authorization of the Ministry of Communications is no longer required if the data network / structured cabling / internal telephone 

certified network cable installer

certified network cable installer

They will be able to put the acquired knowledge into practice in a wide range of applications.They will be able to take advantage of the advanced diagnostic and analysis capabilities of the cable analyzer to carry out certification projects on their own and within established deadlines and budgets

certified network cable installer

cable installer certifications

They will have an in-depth understanding of the standards and technology that govern high-performance structured cabling systems.They can demonstrate their knowledge in real life situations by using the Cable Analyzer to test, repair, and commission high-performance network cabling installations.

cable installer certifications

network cable installer

Technician training and certification course will not only improve the installer's capabilities of cabling technicians, but also their efficiency and productivity during testing, certification and troubleshooting. structured cabling system problems.

network cable installer

network cable certifications

You need to train and certify your current employees to be competitive in the installation and certification of high-speed structured cabling systems. Investing in the Fluke Networks two-day Certified Cabling Test

network cable certifications 

certified network cable installer training

Personnel trained with for work at heights in industrial buildings.Trained personnel and resources to work in cold rooms and low temperatures design and installation of singlemode, multimode fiber optic links, splicing, fiber fusion.

certified network cable installer training

network cable installer certification

We have certification in canalization systems with Charbroil for ladders, meshes, galvanized conduit pipes and PVC for structured cabling. We are network installers and designers certified.

network cable installer certification

cnci

Design and installation of networks with structured cabling for voice, data, CCTV, lighting. Design of multi mode, single mode, fiber fusion and splicing fiber optic link our services include structured cabling channel capacity testing and certification process with the manufacture

cnci

cnci certification

We extended warranties for our structured cabling installations in all those projects that include the pipeline and cabling service with us under strict compliance with the standard.

cnci certification

network cabling certification

Supply, Installation, Configuration, Support and Maintenance to Voice and Data Networks. We are a reliable solution to interconnect your computer equipment.

install mesh channeling, tray, ladder, conduit pipe, thin wall and thick wall galvanized, light and heavy based on international standards.

network cabling certification

cnci certification

In a wired or home wi-fi network, it can be used to connect home automation devices. Last but not least, a wired or wi-fi network allows the use of multimedia content on multiple devices, such as smart TVs, computers or tablets, home or business.

cnci certification

cnci

Coupled with a video surveillance system , it allows a remote audio / video connection, thus giving the possibility of controlling the environments and any false alarms.

cnci

network cable installer certification

This allows the company to comply with the standards imposed by the bodies in charge. In the provinces of Alessandria and Savona, STEI is among the very few companies to have its own equipment, suitable for certification of wired networks.

network cable installer certification

certified network cable installer training

Correct functioning and stability of the safety devices is achieved with wired network systems, which is why STEI Srl is able to design, install and certify them thanks to the investment in equipment and training courses for its technical staff. 

certified network cable installer training

network cable certifications

provides this service of wired network systems to its customers and, thanks to the equipment of state-of-the-art instrumentation, tests and certifies the correct wiring of each point of the network.

network cable certifications

network cable installer

The systems in optical fiber are useful to cover large distances, transferring data at a very high speed. Wi-Fi systems are used in particular for connecting devices without any cables, or for transmitting data over medium distances via radio.

network cable installer

network cabling certification

The systems of wired networks in copper, through fast Ethernet cables are the most common, they allow you to connect an internal computer network to a company or a private home.

network cabling certification

cable installer certifications

Deals with networks for the provinces of Alessandria and Savona, not only in the IT context, but also in the areas of video surveillance, burglar alarms and home automation, sectors for which a reliable wired network is needed that allows interconnectivity even remotely.

cable installer certifications

certified network cable installer

As for the parts of the electrical systems, so the systems of certified wired networks are essential services within a civil, commercial or industrial building. A constant high-speed data flow is increasingly a necessity not only for companies and professionals, but also in the home. 

certified network cable installer